Tips and tricks to increase the quality of the Guitar Audio Interface using the guitar loop pedal

You don’t need an audio interface to record anything like that. Still, you’ll require an audio interface if you want to record professional, high-quality sound, just like your favorite musicians. You want to sound professional, but your laptop is deprived of the quality that might make you the next star; well, it can be compensated by an audio interface.

A guitar loop pedal allows you to record a passage of music and loop it, i.e., play it back on repeat. Thus, you can record several instances of yourself and create your virtual band.

The solo artists usually love playing with the loop on acoustic. This gives them an upper hand over other competitors on stage because of the unique sound since not many people use loopers. 

And even if you are not planning to play it at a restaurant or bar where ofcourse it’s a really great deal, it wouldn’t be a bad idea to play it for yourself alone or your partner, on a nice romantic evening. All you need to do this is have an acoustic-electric, an external pickup, or a microphone and digital audio workstation.

While guitar loop pedals help you enhance your music and play it as you need, connect your microphones, guitar, keyboard, and other audio sources to your computer. When you are recording your play and performances using just a single microphone or instrument, you will need just one single input. The instrumental level, like the guitars, will need a line-level input on the audio interface, while for microphones, you’ll need an audio interface that has a mic preamp built-in.

When you have two inputs, you have twice the versatility. In the future, when you need to record the outputs from a CD player or a keyboard which are usually stereo, you might need two inputs in your audio interface. 

There are usually two outputs on the guitar audio interfaces. First, feed the monitor speakers, one for the left and the other for the right. The extra outputs on the audio interface help hook up the production to a 5.1 or 6.1 surround setup.

Some of the looper pedal tricks you can try for your concert are as follows:

Stutter: 

Just capture a tiny part of the audio, usually from the end of a phrase, and let it play.

Punctuations: 

Use one looper that does not allow more than a loop or perhaps the dedicated micro phrase loopers that only capture a tiny buffer. 

Pads: 

Use a volume pedal or the guitar’s volume knob to swell the chords in a chord progression. After getting the loop to turn it to the minimum speed, engage for a dedicated half-time setting. 

Reverse solo: 

When the loopers have dedicated effects, it becomes possible to use reverse solo. Play your solo, and then as you finish, trigger the reverse and play modes on the looper using both your feet.

Stacking Drones: 

You can set the mix volume at just below unity, and then you can start playing the drone note before you hit play on the looper for both the initial loop and every additional stacked loop. 

Record and Manipulate: 

When you add a wah, you can play a loop, and then add filtering other modulations will also work just fine. 

An audio interface improves sound quality significantly by accurately reproducing the sound passed into it and out to your studio monitors or headphones. It’s very easy to operate it, and once you know the trick, you are set to go.

Leave a Reply

Your email address will not be published. Required fields are marked *